Skip to Content
Make Your Mark Models
Store
Events
Extras
0
0
Contact
Make Your Mark Models
Store
Events
Extras
0
0
Contact
Store
Events
Extras
Contact
Store Hornby YGB Bogie Seacow Ballast Hopper (2005 Tooling)
ygb plain website.jpg Image 1 of 3
ygb plain website.jpg
ygb primed website.jpg Image 2 of 3
ygb primed website.jpg
ygb painted website.jpg Image 3 of 3
ygb painted website.jpg
ygb plain website.jpg
ygb primed website.jpg
ygb painted website.jpg

Hornby YGB Bogie Seacow Ballast Hopper (2005 Tooling)

from £2.65

A hand cast polyurethane resin wagon load for Hornby OO Gauge YGB Bogie Seacow Ballast Hopper Wagon. (2005 Tooling)

Approximate size 105mm long x 31mm wide. Approximate weight 19g.

These loads suit the model Hornby produced up until the time they inherited the old Lima tooling, loads for which are listed in the Lima category.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted - this load has been primed and painted with enamel paint to resemble ballast / gravel and is ready to fit.

Wagon is NOT included!

This item is not suitable for children under 14 years.

Finish:
Quantity:
Add To Cart

A hand cast polyurethane resin wagon load for Hornby OO Gauge YGB Bogie Seacow Ballast Hopper Wagon. (2005 Tooling)

Approximate size 105mm long x 31mm wide. Approximate weight 19g.

These loads suit the model Hornby produced up until the time they inherited the old Lima tooling, loads for which are listed in the Lima category.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted - this load has been primed and painted with enamel paint to resemble ballast / gravel and is ready to fit.

Wagon is NOT included!

This item is not suitable for children under 14 years.

A hand cast polyurethane resin wagon load for Hornby OO Gauge YGB Bogie Seacow Ballast Hopper Wagon. (2005 Tooling)

Approximate size 105mm long x 31mm wide. Approximate weight 19g.

These loads suit the model Hornby produced up until the time they inherited the old Lima tooling, loads for which are listed in the Lima category.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted - this load has been primed and painted with enamel paint to resemble ballast / gravel and is ready to fit.

Wagon is NOT included!

This item is not suitable for children under 14 years.

You Might Also Like

haa 2003 flat plain.jpg haa 2003 flat plain.jpg haa 2003 flat plain.jpg haa 2003 flat plain.jpg haa 2003 flat plain.jpg haa 2003 flat plain.jpg
Hornby HAA 32.5T MGR Hopper (2003 Tooling)
from £2.80
27T Tip plain.jpg 27T Tip plain.jpg 27T Tip plain.jpg
Hornby 27T Tippler Mineral
from £2.30
7 Plank 1998 Plain.jpg 7 Plank 1998 Plain.jpg 7 Plank 1998 Plain.jpg
Hornby 7 Plank (1998)
from £2.30
s-l1600.jpg s-l1600.jpg s-l1600.jpg
Hornby LWB Large Mineral Open (Railroad)
from £2.55
s-l1600.jpg s-l1600.jpg s-l1600.jpg
Hornby Departmental ZFO Trout Ballast Hopper
from £2.75

© 2020 Make Your Mark Models