Hornby MHA Coalfish

from £2.65

A hand cast polyurethane resin wagon load for Hornby OO Gauge MHA Coalfish Wagon.

(The standard Ballast load is supplied to fit the 2004 Tooling. It can be reduced in size slightly to fit the 2003 version of this wagon.)

Approximate size 101mm long x 32mm wide. Approximate weight 20g.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted - this load has been primed and painted with enamel paint to resemble ballast / gravel and is ready to fit.

The Shale and Shale & Boulders loads were made to a customer’s specification to represent the loads carried during the construction of the sea wall at Minehead. They are available to fit both the 2003 and 2004 tooling of the MHA wagon. The 2004 version has a more accurate body with reduced height.

Approx. size Shale 03 98mm x 28mm. Approx. 15g.

Approx. size Shale & Boulders 03 98mm x 28mm. Approx. 25g.

Approx. size Shale 04 101mm x 31.5mm. Approx. 16g.

Approx. size Shale & Boulders 04 101mm x 31.5mm. Approx. 27g.

Wagon is NOT included!

This item is not suitable for children under 14 years.

Contents:
Tooling:
Finish:
Quantity:
Add To Cart

A hand cast polyurethane resin wagon load for Hornby OO Gauge MHA Coalfish Wagon.

(The standard Ballast load is supplied to fit the 2004 Tooling. It can be reduced in size slightly to fit the 2003 version of this wagon.)

Approximate size 101mm long x 32mm wide. Approximate weight 20g.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted - this load has been primed and painted with enamel paint to resemble ballast / gravel and is ready to fit.

The Shale and Shale & Boulders loads were made to a customer’s specification to represent the loads carried during the construction of the sea wall at Minehead. They are available to fit both the 2003 and 2004 tooling of the MHA wagon. The 2004 version has a more accurate body with reduced height.

Approx. size Shale 03 98mm x 28mm. Approx. 15g.

Approx. size Shale & Boulders 03 98mm x 28mm. Approx. 25g.

Approx. size Shale 04 101mm x 31.5mm. Approx. 16g.

Approx. size Shale & Boulders 04 101mm x 31.5mm. Approx. 27g.

Wagon is NOT included!

This item is not suitable for children under 14 years.

A hand cast polyurethane resin wagon load for Hornby OO Gauge MHA Coalfish Wagon.

(The standard Ballast load is supplied to fit the 2004 Tooling. It can be reduced in size slightly to fit the 2003 version of this wagon.)

Approximate size 101mm long x 32mm wide. Approximate weight 20g.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted - this load has been primed and painted with enamel paint to resemble ballast / gravel and is ready to fit.

The Shale and Shale & Boulders loads were made to a customer’s specification to represent the loads carried during the construction of the sea wall at Minehead. They are available to fit both the 2003 and 2004 tooling of the MHA wagon. The 2004 version has a more accurate body with reduced height.

Approx. size Shale 03 98mm x 28mm. Approx. 15g.

Approx. size Shale & Boulders 03 98mm x 28mm. Approx. 25g.

Approx. size Shale 04 101mm x 31.5mm. Approx. 16g.

Approx. size Shale & Boulders 04 101mm x 31.5mm. Approx. 27g.

Wagon is NOT included!

This item is not suitable for children under 14 years.

Hornby 5 Plank (Sand)
from £2.30
Hornby LMS 20 Ton Coke Hopper
from £3.00
Hornby 21T Mineral
from £2.80
Hornby LWB Large Mineral Open (Railroad)
from £2.55
Hornby HAA MGR Hopper (1980 Tooling)
from £2.60