Skip to Content
Make Your Mark Models
Store
Events
Extras
0
0
Contact
Make Your Mark Models
Store
Events
Extras
0
0
Contact
Store
Events
Extras
Contact
Store Hornby HFA/HBA 32.5T MGR Hopper (2003 Tooling)
DSCN2640.JPG Image 1 of 3
DSCN2640.JPG
DSCN2643.JPG Image 2 of 3
DSCN2643.JPG
DSCN2644.JPG Image 3 of 3
DSCN2644.JPG
DSCN2640.JPG
DSCN2643.JPG
DSCN2644.JPG

Hornby HFA/HBA 32.5T MGR Hopper (2003 Tooling)

from £2.80

A hand cast polyurethane resin wagon load for Hornby OO Gauge 32.5T HFA MGR Coal Hopper Wagon. (2003 Tooling)

Approximate size 90mm long x 30.25mm wide. Approximate weight 18g.

To fit this load you will need to remove the canopy hood. I removed mine by simply running my finger nail along it's edge. The load has two slots milled across the top to allow for the replacement of the canopy with it's two cross braces. This load can also be used in the 2003 tooling HBA 32.5T MGR Hopper with hood.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted Coal - this load has been primed and spray painted with good quality automotive matt black paint to resemble coal and is ready to fit.

Wagon is NOT included!

This item is not suitable for children under 14 years.

Finish:
Quantity:
Add To Cart

A hand cast polyurethane resin wagon load for Hornby OO Gauge 32.5T HFA MGR Coal Hopper Wagon. (2003 Tooling)

Approximate size 90mm long x 30.25mm wide. Approximate weight 18g.

To fit this load you will need to remove the canopy hood. I removed mine by simply running my finger nail along it's edge. The load has two slots milled across the top to allow for the replacement of the canopy with it's two cross braces. This load can also be used in the 2003 tooling HBA 32.5T MGR Hopper with hood.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted Coal - this load has been primed and spray painted with good quality automotive matt black paint to resemble coal and is ready to fit.

Wagon is NOT included!

This item is not suitable for children under 14 years.

A hand cast polyurethane resin wagon load for Hornby OO Gauge 32.5T HFA MGR Coal Hopper Wagon. (2003 Tooling)

Approximate size 90mm long x 30.25mm wide. Approximate weight 18g.

To fit this load you will need to remove the canopy hood. I removed mine by simply running my finger nail along it's edge. The load has two slots milled across the top to allow for the replacement of the canopy with it's two cross braces. This load can also be used in the 2003 tooling HBA 32.5T MGR Hopper with hood.

This load can be supplied:

  • Plain Resin - this load will require primer before applying an enamel or acrylic paint.

  • Primed - this load has been pre-primed with good quality automotive primer ready to paint in a colour of  your choice.

  • Painted Coal - this load has been primed and spray painted with good quality automotive matt black paint to resemble coal and is ready to fit.

Wagon is NOT included!

This item is not suitable for children under 14 years.

You Might Also Like

DSCN3112.JPG DSCN3112.JPG DSCN3112.JPG
Hornby 21T Hopper
from £2.30
DSCN3117.JPG DSCN3117.JPG DSCN3117.JPG DSCN3117.JPG
Hornby OTA Timber
from £6.75
s-l1600.jpg s-l1600.jpg s-l1600.jpg
Hornby LWB Large Mineral Open (Railroad)
from £2.55
7 Plank 1952 plain.jpg 7 Plank 1952 plain.jpg 7 Plank 1952 plain.jpg
Hornby 7 Plank (1952)
from £2.30
website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg website x4.jpg
Hornby MHA Coalfish
from £2.65

© 2020 Make Your Mark Models