A range of polyurethane resin wagon loads to suit Hornby OO Gauge wagons

Resin Wagon Load For Hornby Small 16T Mineral Wagon (1960 Tooling)




Resin Sand Load For Hornby Small 16T Mineral Wagon (1960 Tooling)




Resin Wagon Load For Hornby 20T Hopper Wagon




Resin Sand Load For Hornby 20T Hopper Wagon




Resin Wagon Load For Hornby 21T Hopper Wagon




Resin Wagon Load For Hornby 21T Steel Mineral Wagon (1998 Tooling)




Resin Sand Load For Hornby 5 Plank Wagon




Fine Coal Resin Wagon Load For Hornby 7 Plank Coke Wagon



Coarse Coal Resin Wagon Load For Hornby 7 Plank Coke Wagon




Resin Wagon Load For Hornby Large 9 Plank Wagon (1998 Tooling)




Resin Wagon Load For Hornby HAA MGR Hopper Wagon (1980 Tooling)



Resin Wagon Load For Hornby HAA MGR Hopper Wagon - Mounded Coal
(1980 Tooling)





Resin Wagon Load For Hornby HBA MGR Hopper Wagon With Hood
(2002 Tooling)


To fit this load it is necessary to remove the hood.
This is easily achieved by running a finger nail under it's edge.
The load has two slots milled in the top to allow for the
replacement of the hood with it's two cross braces.


Resin Wagon Load For Hornby HBA/HFA 32.5T MGR Coal Hopper With Hood
(2003 Tooling)


To fit this load it is necessary to remove the hood.
This is easily achieved by running a finger nail under it's edge.
The load has two slots milled in the top to allow for the
replacement of the hood with it's two cross braces.


Resin Wagon Load For Hornby HEA Hopper Wagon (1998 Tooling)




Resin Wagon Load For Hornby LWB Large Mineral Wagon (RailRoad)




Resin Ballast/Gravel Load For Hornby MHA 'Coalfish' Box Open Wagon
(2004 Tooling)


This load can be reduced in size slightly to fit the 2003 version of this wagon.

Resin Shale Load For Hornby MHA 'Coalfish' Box Open Wagon
(2003 & 2004 Tooling)



Resin Shale & Boulders Load For Hornby MHA 'Coalfish' Box Open Wagon
(2003 & 2004 Tooling)


The Shale and Shale & Boulders loads were made to a customers specification to represent the loads carried during the construction of the sea wall at Minehead.
They are available to fit both the 2003 and 2004 tooling of the MHA wagon. The 2004 version has a more accurate body with reduced height.


Resin Wagon Load For Hornby OTA Timber Carrying Wagon



This load consists of four different hollow pieces that can be arranged on the wagon in any order to create maximum variety.



Resin Wagon Load For Hornby PGA Aggregate Hopper Wagon (1988 Tooling)




Resin Wagon Load For Hornby YGB Bogie Seacow Ballast Hopper Wagon




Resin Wagon Load For Hornby Departmental ZCV (Clam) & ZBA (Rudd) Wagons




Resin Wagon Load For Hornby Departmental ZCV Tope Wagon




Resin Wagon Load For Hornby ZFO Trout Ballast Hopper Wagon